Redundant Power Supply Unit (Rpsu) And Uninterruptible; Power Supply (Ups) - Nortel 2000 Using Manual

46

Redundant power supply unit (RPSU) and uninterruptible

power supply (UPS)

The redundant power supply connector allows you to connect a backup power
supply unit to the Business Policy Switch. Nortel Networks provides an optional
redundant power supply unit (RPSU) for this purpose. The BayStack 10 Power
Supply Unit is a hot-swappable power supply unit that provides uninterrupted
operation to as many as four Business Policy Switches in the event that any of the
switch power supplies fail.
The BayStack 10 Power Supply Unit has a powerful, modular redundant and
uninterruptible power supply (UPS) functionality in a single chassis. It provides
scalable power redundancy and protection to your networking equipment. The
modules fit into the right-hand side of the rear of the chassis. The UPS and
associated battery pack module fit into the front of the chassis.
For further information, refer to Installation and Reference for the BayStack 10
Power Supply Unit (part number 208296-C). Contact your Nortel Networks sales
representative for more information.
100 Watt DC-DC Converter
The 100 Watt DC-DC Converter operates in conjunction with the Nortel
Networks BayStack 10 Power Supply Unit and 200 Watt AC/DC Power Supply
Module. The 100 Watt DC-DC Converter provides a plug-and-play redundant
power supply unit for the Business Policy Switch 2000, as well as other products
available from Nortel Networks. Contact your Nortel Networks sales
representative for information about the Nortel Networks products that use the
100 Watt DC-DC Converter.
For further information about the 100 Watt DC-DC Converter, refer to Installation
and Reference for the 100 Watt DC-DC Converter Module (part number
209132-B).
Using the Business Policy Switch 2000 Version 1.2