Figure 47 Port Mirroring Configuration Port-Based Screen Example - Nortel 2000 Using Manual

142 Chapter 2 Network configuration
As shown in the Port Mirroring Configuration screen example
is designated as the Monitor Port for ports 24 and 25 in Switch S1.
The Monitoring Mode field [ - > Port X or Port Y - > ] indicates that all traffic
received by port X or all traffic transmitted by port Y is currently being monitored
by the StackProbe attached to Monitor Port 23.
The screen data displayed at the bottom of the screen shows the currently active
port mirroring configuration.

Figure 47 Port Mirroring Configuration port-based screen example

Port mirroring configuration has taken effect.
Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode:
Port X: 25 Port Y: 24
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
208700-B
Note: The Unit value (in the Unit/Port field) is not configurable when
the switch is operating standalone. For detailed information about the
Port Mirroring screen fields, see Chapter 3.
Port Mirroring Configuration
Monitoring Mode:
Monitor Unit/Port:
Unit/Port X:
Unit/Port Y:
Address A:
Address B:
-> Port X or
[ -> Port X
[ /23 ]
[ /25 ]
[ /24 ]
[ 00-00-00-00-00-00 ]
[ 00-00-00-00-00-00 ]
Port Y -> Monitor Port: 23
Press Ctrl-C to return to Main Menu.
(Figure 47), port 23
or Port Y -> ]