Nortel 2000 Using Manual page 144

144 Chapter 2 Network configuration
• Monitor all traffic between address A and address B (conversation between
the two stations).
Figure 49
In this example, port 23 becomes the designated Monitor Port for Switch S1 when
you press Enter in response to the [Yes] screen prompt.
The Monitoring Mode field [ Address A - > Address B ] indicates that all
traffic transmitted by address A to address B will be monitored by the StackProbe
attached to Monitor Port 23.
208700-B
shows the Port Mirroring Configuration screen setup for this example.
Note: The screen data displayed at the bottom of the screen changes to
show the new currently active port mirroring configuration after you
press Enter.
Note: When you enter MAC addresses in this screen, they are also
displayed in the MAC Address Table screen (see Chapter 3).