Figure 67 Vlan Configuration Screen; Table 23 Vlan Configuration Screen Fields - Nortel 2000 Using Manual

Figure 67 VLAN Configuration screen

Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ] Now: 1
IVL/SVL:
1-6
------
Unit #1 TUUUUU
Unit #2 UUUUUU
KEY: T= Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu.
Main Menu.
Table 23

Table 23 VLAN Configuration screen fields

Field
Create VLAN
Delete VLAN
VLAN Configuration
[ 1 ]
[ ]
[ VLAN #1 ]
[ IVL ]
Port Membership
7-12 13-18
------ ------
UUUUUU UUUUUU
UUUUUU UUUUUU
describes the VLAN Configuration screen fields.
Description
Allows you to set up or view configured VLAN workgroups. Enter the number of the
new VLAN you want to create or view, then press [Return]. The Port Membership
fields indicate the corresponding VLAN workgroup configuration, if configured.
Dashes (-) indicate no VLAN Members are configured. Alternatively, you can use
the space bar to toggle through the various configured VLAN workgroups. You can
create up to 255 different VLANs (except VLAN #1).
Default 1
Range 2 to 4094
Allows you to delete specified VLANs, except the assigned management VLAN
(See Management VLAN field). Enter the number of the VLAN you want to delete,
then press [Return], or use the space bar to toggle through the selection until you
reach the VLAN you want to delete, then press [Return].
Chapter 3 Using the console interface 191
VLAN Type:
Protocol Id (PID): [ None
User-Defined PID:
VLAN State:
19-24
------
UUUUUU
UUUUUU
Press Ctrl-C to return to
Using the Business Policy Switch 2000 Version 1.2
[ Port-Based ]
]
[ 0x0000 ]
[ Active ]