Using Cascade Modules; Figure 131 System Characteristics Screen - Nortel 2000 Using Manual

344 Appendix B Interoperability in a mixed stack configuration
You can verify the software version and the ISVN in the sysDescr field (see
Figure

Figure 131 System Characteristics screen

Operation Mode:
Size Of Stack:
Base Unit:
MAC Address:
Reset Count:
Last Reset Type:
Power Status:
Local MDA Type:
sysDescr:
sysObjectID:
sysUpTime:
sysServices:
sysContact:
sysName:
sysLocation:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Menu.
Refer to
information.

Using cascade modules

Installation instructions are provided with each BayStack 400-ST1 Cascade
Module (see Installing the BayStack 400-ST1 Cascade Module). The BayStack
400-ST1 Cascade Module does not operate with BayStack 450 or BayStack 410
switches that are configured with BayStack 450 software versions earlier than
version V1.1.0.
For information about using MDAs, refer to
adapters," on page
208700-B
131) in the System Characteristics screen.
System Characteristics
Stack, Unit # 1
2
1
00-80-2C-8D-23-DF
16
Management Reset
Primary Power
None
Business Policy Switch 2000
HW:AB3 FW:Vx.x SW:v1.0.x.x ISVN: 1
1.3.6.1.4.1.45.3.40.1
0 days, 0:11:3
3
[ ]
[ ]
[ ]
"Software Download screen" on page 257
347.
Press Ctrl-C to return to Main
for software downloading
Appendix C, "Media dependent