System Log Screen - Nortel 2000 Using Manual

System Log screen

The System Log screen
system nonvolatile random access memory (NVRAM) or dynamic random access
memory (DRAM) and NVRAM. When the switch is part of a stack configuration,
the System screen displays only the data for the Business Policy Switch you are
connected to through the Console/Comm port.
System Log messages operate as follows:
• NVRAM messages are retrievable after a system reset.
• DRAM messages can be viewed while the system is operational.
• All NVRAM and DRAM messages are time stamped.
• When you restart your system after a reset, the DRAM messages are deleted.
• After a reset, all messages stored in NVRAM are copied to DRAM (DRAM
messages are not copied to NVRAM). The messages copied to DRAM are
time stamped to zero (0).
To open the Event Log screen:
➨
Choose Display Event Log (or press y) from the main menu.
Chapter 3 Using the console interface 269
(Figure 100) displays or clears messages obtained from
Using the Business Policy Switch 2000 Version 1.2