Nortel 2000 Using Manual page 29

• Using Web-based Management for the Business Policy Switch 2000 Software
Version 1.2 (part number 209570-B)
Describes how to use the Web-based management tool to configure switch
features.
• Reference for the Business Policy Switch 2000 Command Line Interface
Software Version 1.2 (part number 212160-A)
Describes how to use Command Line Interface (CLI) commands to configure
and manage the BPS 2000.
• Installing Media Dependent Adapters (MDA)s (part number 302403-D)
Describes how to install optional MDAs in your Business Policy Switch 2000.
• Gigabit Interface Converter (GBIC) Installation Guide (part number
208723-A)
Describes how to install optional GBICs into the optional MDA in your
Business Policy Switch 2000.
• Installing the BayStack 400-ST1 Cascade Module (part number 304433-B)
Describes how to connect up to eight switches into a stack configuration by
installing optional BayStack 400-ST1 Cascade Modules.
• BayStack 10 Power Supply Unit Installation Instructions (part number
208558-B)
Describes installation, power-up, power-down and fan replacement
procedures.
• Release Notes for the BayStack 10 Power Supply Unit (part number
208560-B)
Documents important changes about the RPSU/UPS that are not covered in
other related publications.
• Installation and Reference for the BayStack RPSU/UPS (part number
208296-C)
Describes how to install the optional RPSU/UPS to your Business Policy
Switch 2000.
• 100 Watt DC-DC Converter Installation and Reference Guide (part number
209132-B)
Describes installation and removal procedures for the 100-watt DC-to-DC
converter for your Business Policy Switch 2000.
Using the Business Policy Switch 2000 Version 1.2
Preface 29