Connectors And Pin Assignments; Rj-45 (10Base-T/100Base-Tx) Port Connectors; Figure 152 Rj-45 (8-Pin Modular) Port Connector - Nortel 2000 Using Manual

Appendix E

Connectors and pin assignments

This appendix describes the Business Policy Switch 2000 port connectors and pin
assignments.

RJ-45 (10BASE-T/100BASE-TX) port connectors

The RJ-45 port connectors
end stations without using crossover cables. (See
page 382
Category 3 (or higher) UTP cable. For 100BASE-TX connections, use only
Category 5 UTP cable.

Figure 152 RJ-45 (8-Pin Modular) port connector

1
(Figure
for information about MDI-X ports.) For 10BASE-T connections, use
8
616EA
152) are wired as MDI-X ports to connect
"MDI and MDI-X
Using the Business Policy Switch 2000 Version 1.2
381
devices" on