Figure 30 Default Vlan Configuration Screen Example - Nortel 2000 Using Manual

To configure the VLAN port membership for VLAN 1:
1
Select Switch Configuration from the Business Policy Switch Main Menu
(or press w).
2 From the Switch Configuration Menu, select VLAN Configuration
(or press v).
3
From the VLAN Configuration Menu select VLAN Configuration
(or press v).
The default VLAN Configuration screen opens

Figure 30 Default VLAN Configuration screen example

Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ] Now: 1
IVL/SVL:
1-6
------
Unit #1 UUUUUU
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of
VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
The VLAN Configuration screen settings shown in
with all switch ports classified as untagged members of VLAN 1.
Figure 31
the VLAN 3 broadcast domain shown in
VLAN Configuration
[ 1 ]
[ ]
[ Default VLAN ]
[ IVL ]
Port Membership
7-12 13-18
------ ------
UUUUUU UUUUUU
shows the VLAN Configuration screen after it is configured to support
Chapter 2 Network configuration 117
Vlan Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
19-24
------
UUUUUU
Press Ctrl-C to return to Main Me
Figure 29
Using the Business Policy Switch 2000 Version 1.2
(Figure 30):
[ Port-Based ]
None ]
[ 0x0000 ]
[ Active ]
Figure 30 are default settings
(VLAN Name is optional).