Multilink Trunk Configuration Screen; Figure 74 Multilink Trunk Configuration Menu Screen; Table 31 Multilink Trunk Configuration Menu Screen Options - Nortel 2000 Using Manual
Business policy switch
Hide thumbs
Also See for 2000:
- Software reference manual (359 pages) ,
- User manual (86 pages) ,
- Hardware installation manual (26 pages)
Table of Contents
Advertisement
208 Chapter 3 Using the console interface
Figure 74 MultiLink Trunk Configuration Menu screen
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Table 31
Table 31 MultiLink Trunk Configuration Menu screen options
Option
MultiLink Trunk
Configuration...
MultiLink Trunk
Utilization...
MultiLink Trunk Configuration screen
The MultiLink Trunk Configuration screen
to six trunks in a standalone switch or stack. In a stack configuration, trunk
members can be distributed between any of the units within the same stack
configuration.
208700-B
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
describes the MultiLink Trunk Configuration Menu screen options.
Description
Displays the MultiLink Trunk Configuration screen
allows you to configure up to six MultiLink Trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports together to
form each trunk.
Displays the MultiLink Trunk Utilization screen
screen allows you to monitor the bandwidth utilization of the configured trunks.
Press Ctrl-C to return to Main Menu.
(Figure
(Figure 76
(Figure
75) allows you to configure up
75). This screen
and
Figure
77). This
Advertisement
Table of Contents
Troubleshooting
