Figure 1-23. Vlan Configuration Screen Example For Switch Sw1 (2 Of 2) - Nortel BayStack 350 Series Manual

Port Trunk
---- -----
13 I2
14 I2
15
16
17 S1
18
19 I3
20 I3
21
22 I4
23 I4
24
25 I1
26 I1
Press Ctrl-P to display choices for ports 1-12.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-23. VLAN Configuration screen example for switch SW1 (2 of 2)
To move a port or trunk to another VLAN, you simply use the arrow keys to
navigate the screen and press the space bar to display choices. Press [Enter] to
select your choice.
For more information about navigating the screens, see "Navigating the CI Menus
and Screens" on page 3-5. For more information about configuring VLANs, see
"VLAN
Trunk Configuration Screen for Switch SW2
As shown in
configurations (I1 and I2). Both trunks connect directly to switch SW1.
As in the previous screen examples, to set up an inter-switch trunk configuration
you choose Inter-Switch Trunk Configuration from the MultiLink Trunk
Configuration Menu screen.
Figure 1-24
893-00992-E
VLAN Configuration
V1 V2 V3
----- ----- -----
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
[ X ] [ ] [
Workgroups" on page
Figure 1-17, switch SW2 is set up with two inter-switch trunk
shows the Inter-Switch Trunk Configuration screen for switch SW2.
V4 V5
----- -----
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
] [ ] [ ]
Press Ctrl-C to return to Main Menu.
1-16.
Getting Started
1-35