Figure 1-35. Default Vlan Configuration Screen Example - Nortel BayStack 450-24T Using Manual

To configure the VLAN port membership for VLAN 1:
1.
2.
3.
Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 UUUUUU
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-35. Default VLAN Configuration Screen Example
The VLAN Configuration screen settings shown in Figure 1-35 are default
settings with all switch ports classified as untagged members of VLAN 1.
Figure 1-36 shows the VLAN Configuration screen after it is configured to
support the VLAN 3 broadcast domain shown in Figure 1-34 (VLAN Name is
optional).
309978-D Rev 01
Select Switch Configuration from the BayStack 450-12T Main Menu
(or press w).
From the Switch Configuration Menu, select VLAN Configuration
(or press v).
From the VLAN Configuration Menu select VLAN Configuration
(or press v).
The default VLAN Configuration screen opens (Figure 1-35):
VLAN Configuration
[ 1 ]
[ ]
[ VLAN #1 ]
Port Membership
7-12
------
UUUUUU
BayStack 450 10/100/1000 Series Switches
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
Press Ctrl-C to return to Main Menu.
[ Port-Based
None
[ 0x0000 ]
[ Active
1-63
]
]
]