Hovering Pitch; Hov Pit - FUTABA 6K Instruction Manual

Hovering pitch

HOV PIT

Function
The hovering pitch function trims the pitch near
the hovering point.
When the hovering pitch VR is turned clockwise,
the pitch gets stronger and when it is turned
counterclockwise, the pitch gets weaker. Rotor
speed changes due to changes in temperature,
humidity, and other flying conditions can be
trimmed. Adjust for the most stable rotor rotation.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Trim memory settting
VR setting
Selection of condition
● Select the setting item
with the Jog key.
Hovering Pitch
■ Activating the function
① S e l e c t t h e " M I X "
i t e m a n d t h e n
select the "ON" by
pressing the + key
or – key.
● When you do not use a function, set to
the "INH" side.
■ VR setting
③ Select the "VR" item
and then select the
"VR" b y p r e s s i n g
the + key or – key.
Range：NULL （ OFF） , +VR, -VR
Default：-VR
② Select
from the menu with the
Jog key.
● NORM：Only the normal condition operates
● NORM/IDL1：It operates by normal condition and
idle-up1.
■ Selection of condition
② Select the "MODE" item
＋ －
or
（Memorizing the hovering pitch adjustment position）
■ Memory setting
＋ －
④ Select the "RATE" item and memorize the current
or
More precise trimming is possible by using
this function together with the hovering throttle
function.
●The operating condition can be selected from
normal only and normal/idle up 1.
●The trim position can be memorized. If it is
memorized before the model memory is changed,
the original trim state can be retrieved by merely
setting the VR to the center when the trim position
is recalled.
"HOV PIT" ③ Open the setting screen by
and then select condition
by pressing the + key or –
key.
Range：NORM, NORM/IDL1
Default：NORM
trim position by pressing the Jog key.
● When the VR is returned to the center after
memorization, the trim position returns to its
previous position.
［NOTE］If memorization is repeated at the same
position, the value is cumulated.
(HELICOPTER)
pressing the Jog key.
● When "INH", the function
cannot be used. To use the
function, switch to "ON".
（Compensation amount at trim
memory）
（Actual compensation amount
including the hovering pitch
VR）
● The VR operating direction is
different depending on the
polarity
＋ －
or
133