Front Wheel - Buell S1 Lightning Workshop Manual

MODEL YEAR CHANGE
See Figure 10. All 1997 model year motorcycles have new
fasteners on the front brake rotor/carrier assembly.
Separate the carrier from the rotor only when necessary. Use
new clips when reassembling.
NOTE
The new rotor/carrier assembly changes Step 4 of
WHEEL, REMOVAL and Step 2 of
BLY in the 1996 manual.
REMOVAL/INSTALLATION
1. See Figure 10. Remove and discard the clip (2).
2. Remove the wave washer (3).
3. Remove the drive pin (1). Repeat this procedure for the
other five fasteners to separate the carrier (4) from the
rotor (5).
4. Assemble in reverse order. Use new clips upon assembly.
14

FRONT WHEEL

FRONT
FRONT WHEEL, ASSEM-
5874
1
1. Drive pin (6)
2. Clip (6)
3. Wave washer (6)
Figure 10. 1997 Rotor to Carrier Fastener
5
2
4
3
4. Carrier
5. Rotor