Clutch Slave Cylinder Disassembly - Honda 1985 CBX750F Workshop Manual

~HONDA
~
CBX750F
CLUTCH
CLUTCH SLAVE CYLINDER
DISASSEMBLY
Place a container under the slave cylinder, remove
the oil bolt and disconnect the clutch hose.
NOTE :
Avoid spilling clutch fluid on painted surfaces.
Remove the slave cylinder.
(11 SL AVE CYL IN DER
( 2/
OIL BOLT
(1) A I R NOZZLE
Remove the piston from the cylinder.
If piston removal is hard, place a shop towel over
the piston to cushion the piston when it is expelled,
and position the cylinder with the piston down.
Apply compressed air to the fluid inlet to remove
the piston. Use the air in short spurts.
-.
(1) SPRING
Remove the spring from the slave cylinder.
Remove the oil and piston seals.
Clean the piston groove with clutch fluid .
Check the piston spring for weakness or damage .
(2) OIL SEAL (3) PISTON SEAL
8-7