Shock Absorber Linkage Removal - Honda 1985 CBX750F Workshop Manual

~HONDA
~
CBX750F
REAR WHEEL/SUSPENSION
Connect the shock arm and link. and tighten the
nut.
TORQUE: 40-50 N·m
(4.0-5.0 kg-m, 29-36 ft-Ib)
Clamp the damping adjuster cable properly (page
1·8).
Install the left and right side covers.
Install the rear wheel (page
14·8).
Adjust the shock absorber
ai~
pressure (page 3·15).
(1) SHOCK ARM
(2) SHOCK LIN K
SHOCK ABSORBER LINKAGE
REMOVAL
Remove the muffler by removing the exhaust pipe
attaching nuts. muffler-to-footpeq bracket bolts and
exhaust chamber-to-enqine bolts .. '
(1) MUFFLER
Remove the shock link by removing the shock link­
to-arm bolt. shock absorber lower mounting bolt
and shock link-to-swingarm bolt.
Remove the shock arm from the frame.
(3) SHOCK ABSORBER LOWER MOUNTING
BOLT
(2) SHOCK LIN K
~
14-14