Table of Contents
Advertisement
--
HONDA
CBX7S0F
GEARSHIFT LINKAGE
INSPECTION
Check the gearshift shaft, drum shifter, pawls,
plungers and springs for wear or
damage.
GEARSHIFT LINKAGE
INSTALLATION
Install the washers, stopper arm, collar and return
spring onto the bolt.
Temporarily install the stopper arm bolt and hook
the return spring to the stopper arm, then tighten
the
bolt.
TORQUE: 10-14 N·m
.
(1_0-1.4 kg-m, 7-10 ft-lb)
Install the springs, plungers and pawls to the drum
shifter.
While holding the pawls, install the drum shifter as
sembly into the gearshift drum so that the index
line on the shifter tooth faces forward as shown.
Install the guide plate dowel pins and spacer collar.
9-4
Advertisement
Table of Contents
Troubleshooting
