Front Forks Installation - Honda 1985 CBX750F Workshop Manual

~HONDA
~
CBX750F
FRONT WHEEL/SUSPENSION/STEERING
Hold the fork tube in a vise with soft jaws or a shop
towel, and install and tighten the fork tube cap.
TORQUE: 15-30 N·m
(1.5-3.0 kg-m, 11-22 ft-lb)
NOTE:
On the right fork, align the cavity on the
damping adjuster rod with the flat side in the
piston.
(1 ) CAV ITY
.e::
.--.
(3)
FORK TUBE CAP
INSTALLATION
Install the fork and temporarily tighten the bottom
pinch bolt.
Install the fork stop ring in the groove in the fork
~
~~.
the fork tube up until the stop ring contacts
~
• . ­
the air joint.
\
(1) FORK STOP RING
13-30