Steering Stem Installation - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
FRONT WHEEL/SUSPENSION/STEERING
INSTALLATION
( 1)
UPPER BEARI NG (2 ) UPPER BEARING I NNER RACE
Pack the bearing cavities with bearing grease.
Install the lower bearing onto the steering stem .
Install the grease retainer on the steer ing stem. then
insert the steering stem into the steering head .
Install the upper bearing in the steering head.
Install the upper bearing inner race and dust seal.
(3 ) LOWER BE ARING
III
EXT ENSIO N BAR
I nstall the bearing adjustment nut and tighten it to
the specified torque.
TORQUE: 23-27 N·m
(2.3-2.7
kq-rn,
17-20
ft-Ib] ­
,.- ­
~ ~
.
~-........
, .t ~
W
·> 7
~
07716-0020500
Turn the steering stem all the way to right and left
five t imes to seat the bearings .
Ret ighten the adjustment nut to the same torque.
Turn the steering stem to seat the bearings.
13-36