Piston Installation; Cylinder Installation - Honda 1985 CBX750F Workshop Manual

HONDA
CBX7S0F
;-­
CYLINDER/PISTON
PISTON INSTALLATION
Apply molybdenum disulfide grease to the connect·
ing rod small ends.
Install the pistons, piston pins and clips. Be careful
not to drop clips into the crankcase.
NOTE :
• Pos ition the '" N" mark on the piston
crown toward the intake side .
• Install the p istons in their original posi­
tions.
11) GASKET
CYliNDER INSTALLATION
Clean the cylinder gasket surface of the crankcase .
CAUTION
Be careful not to damage the gasket surface.
Install the dowel pins and a new gasket.
(2) DOWEL PINS
Put the No.2 and 3 pistons at TDC .
Place piston bases under the p istons, compress the
piston rings with piston ring compressors and slide
the cylinder over the No.2 and 3 pistons.
Remove the piston ring compressors and piston
bases .
(1) PISTON RING COM PRES SOR S
07 954-2830000
~ ~"7 ~~
_
-e
(2)
ji
PISTON BASES
07958-3000000
7-7