Bearing Selection; Connecting Rod Bearing Inserts - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
CRANKSHAFT/STARTER CLUTCH
---------------------------------
.­
Install the main bearings on the correct journals on
the lower crankcase and tighten them evenly in the
sequence shown and in 2·3 steps.
TORQUE: 21-25 N·m
(2.1-2.5 kg-m, 15-18 ft-Ib)
NOTE:
Do not rotate the crankshaft during inspec­
tion .
Remove the lower crankcase and measure the com­
pressed plastigauge on each journal.
OIL CLEARANCE SERVICE LIMIT:
0.05 mm (0.002 in)
-
BEARING SELECTION
If rod bearing clearance is beyond tolerance, select
replacement bearings as follows:
CONNECTING ROD BEARING INSERTS
Determine and record the corresponding rod 1.0.
code number.
(1)
1.0. CODE NUMBER
12-14