Rear Master Cylinder Removal - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
HYDRAULIC BRAKES
\
Install the caliper assembly to the bracket so that
the disc is positioned between the pads, being care­
ful not to damage the pads.
Tighten the caliper mount bolt and pin bolt.
TORQUE:
CALIPER MOUNT BOLT:
20-25 N·m (2.0-2.5 kg·m, 14-18 ft-Ib)
CALIPER PIN BOLT:
25-30 N·m (2.5-3.5 kg-m, 18-22 ft-lb)
Connect the brake hose to the caliper with the oil
bolt and two sealing washers. and tighten the oil
bolt.
TORQUE: 25-30 N·m
(2.5-3.0 kg·m, 18-22 ft-Ib)
Fill the brake fluid reservoir and bleed the brake
system (page 15-41.
REAR MASTER CYLINDER
REMOVAL
Drain the brake fluid from the rear brake system
(page 15-31. --- .-­
Remove the oil bolt and disconnect the brake hose
from the master cylinder.
Remove the right footpeg bracket.
(1) FRONT
(21 PIN
BOLT
(3/
REAR
(4) MOUNT BOLT
(5) MOUNT
(21 PIN
BOLT
BOLT
15-14