Front Master Cylinder Disassembly; Disc Thickness; Brake Disc Warpage - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
HYDRAULIC BRAKES
,
DISC THICKNESS
Measure the thickness of each disc.
SERVICE LIMIT:
FRONT: 4.0 mm (0.16 in)
REAR: 6.0 mm (0.24 in)
BRAKE DISC WARPAGE
"".-,:
..
Measure brake disc for warpage.
~~~~JL
SERVICE LIMIT: 0.30 mm (0.012 in)
,.
,.
,
:
.',
FRONT MASTER CYLINDER
DISASSEMBLY
Drain brake fluid from the hydraulic system.
Remove the brake lever and rear view mirror from
the master cylinder. Disconnect the brake hose.
CAUTION
Avoid spilling brake fluid on painted surfaces.
Place a rag over the fuel tank whenever the
brake system is being serviced.
NOTE:
When removing the fluid hose bolt, cover the
end of the hose to prevent contamination.
Secure the hose to prevent fluid from leaking
out.
Disconnect the front brake switch wires.
Remove the front brake master cylinder.
15-8