HONDA
CBX750F
IGNITION SYSTEM
(1) PULSE GENERATOR COVER
Remove the pulse generator cover and drive sprock
et cover.
(n PULSE GENERATORS
Remove the pulse generator mounting screJs. pulse
generators and wire guide.
Install new pulse generators and wire guide.
Align the pulse rotor tip with the pulse generator
magnet· and measure the air gap-with
a
feeler
gauge.
AIR GAP: 0.5-0.9 mm (0.02-0.04 in)
Check the ignition timing.
Install the drive sprocket cover and pulse generator
cover.
SPARK UNIT
(2) AIR GAP
(1) SPARK UNIT
If
the pulse generators, ignition coils and wiring are
good, and the ignition timing is not within specifica
tion; replace the spark units with new ones and
recheck the ignition timing.
17-4