Engine Oil Level; Engine Oil And Filter Change - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
LUBRICATION
ENGINE OIL LEVEL
Put the motorcycle on its center stand on level
ground. Start the engine and let it idle for
2-3
min ­
utes. Turn off the engine and wait for
2-3
minutes.
Remove the filler cap/dipstick, wipe it clean and
insert it without screwing it in . Remove the filler
cap/dipstick and check the oil level.
If the oil level is below or near the lower level mark
on the dipstick, fill to the upper level mark with
recommended oil.
ENGINE
OIL
&
FILTER CHANGE
NOTE'.
Change engine oil with the engine warm and
the motorcycle on its center stand to assure
complete and rapid draining.
Do not touch the exhaust pipes and frame
while they are hot.
Remove the oil filler cap.
Remove the under cowl.
Remove the engine and frame drain plugs, and drain
the engine
0
il.
Loosen the oil filter with a filter wrench
(07912­
6110001)
and remove the filter through the space
between the No .4 exhaust pipe and frame .
Discard the oil filter.
Apply thread lock agent to the filter boss threads
in the crankcase.
Coat a new oil filter gasket with clean oil, and install
a new oil filter.
Tighten the oil filter with the filter wrench
(07912 ­
6110001).
TORQUE:
15-20 N·m
(1.5-2.0 kq-rn, 11-14 ft-Ib)
Wipe spilled oil off the exhaust pipes.
UPPER
LEVEL
: , .: . ' ..
~ .~
.• "
~·~
...
rt ·,, ~ · ~ I..:r~
...· V
(1)
ENGINE DRAIN PLUG
(2) FRAME DRAIN PLUG
(3) OIL FILLER CAP/DIPSTICK
t¢~<~;:~~·· · ' - ~\~:·_ · -
(2) OIL FILTER
2-3