Alternator Output Test; Stator Continuity Test - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
BATTERY/CHARGING SYSTEM
Ampere and voltage should be controlled to 0 A and
14-15 V.
If the readings do not meet the specifications, check
the wires, for loose connections and repair as neces­
sary.
If the wires are in good condition, replace the regu·
lator/rectifier with a new one and re-test.
If the readings still do not meet the specifications,
perform the alternator output test.
ALTERNATOR OUTPUT TEST
Disconnect the white wire from the alternator wire
coupler and ground it.
Connect an ammeter and voltmeter as same as the
current test(pagl! 16-4).
Charging amperage should be a minimum of 12.5 A
at 1,750 min" (rpm) and should be a minimum of
20 A at 4,350 min" (rpm).
(1) WHITE
WIRE
STATOR CONTINUITY TEST
Remove the left frame side cover.
Disconnect the alternator wire coupler from the
regulator /rectifier.
Charging coil
Check for continuitv between the yellow wire ter­
minals, and between the yellow wire terminals and
ground.
Replace the stator if there is no continuity between
the yellow wire terminals, or if there is continuity
between the yellow wire terminals and ground.
Field coil
Check for continuity between the black and white
wire terminals. Replace the stator if there is no con­
tinuitv.
(1) ALTERNATOR WIRE COUPLER.
16-5