Camshaft Inspection; Camshaft Bearing Surfaces; Camshaft Runout; Cam Lobe Height - Honda 1985 CBX750F Workshop Manual

HONDA
CBX7S0F
CYLINDER HEAD/VALVES
INSPECTION
CAMSHAFT BEARING SURFACES
Inspect the cam bearing surfaces for scoring ,
scratches, or evidence of insufficient lubrication .
Also, inspect the bearing surfaces of the camshaft
holders.
CAMSHAFT RUNOUT
Check camshaft run-out with a dial ind icator.
Support both ends of the camshaft with V-blocks .
SERVICE LIMIT: 0.10mm (0.004. in)
CAM LOBE HEIGHT
Check the camshaft lobes for wear or damage.
If the lobes are scored, inspect the rocker arm sur­
faces also.
Measure the cam lobe height with a micrometer.
SERVICE LIMIT:
IN, EX: 32.75 mm (1.289 in)
6-5