Carburetor-Choke; Air Cleaner - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
MAINTENANCE
CARBURETOR-CHOKE
The choke system uses a fuel enrich ing circu it
controlled by a bystarter valve. The bystarter valve
opens the enriching circuit via cable when the
choke lever on the handlebar is pulled back.
Check ' fo r smooth operation of the choke lever.
Lubricate the choke cable, if the operation is not
smooth.
Pull the choke lever on the handlebar ·all the way
back to fully open position and measure the choke
valve stroke at the No. 3 carburetor between the
fully closed and fully open positions.
CHOKE VALVE STROKE: 5-7 mm (3/16-1/4 in)
Adjust if necessary, by loosening the choke cable
clamp on the carburetor and moving the choke
cab\~
ca<;,\f\9 <;,0
the choke lever h. iully open.
Tighten the clamp.
Push the choke lever up all the way to fully closed.
Make sure the choke valve is fully closed by check ­
ing for free play in the cable between the lever on
the carburetor and cable casing .
Reinstall the removed parts in the reverse order of
disassembly .
AIR CLEANER
Remove the left frame side cover.
Disconnect the regulator/rectifier couplers and re­
move the air cleaner case cover by removing the
fou r screws.
(1) CHOKE L EV ER
" .
..
r -- - --.--.
I
. 5·7mml3 16·1 410,
' ~
i -' ~: ~:~­
!
lL.-JJ
~ , .:-:::-.:- ,
i
'~
(1) CAB LE CLAMP
(2) CHOKE CABLE
(1)
REGULA TOR /REC TI FI ER COUP LERS
(2) AIR CLEANER CASE
COVER
3-6