Table of Contents
Advertisement
Configuring the phone via the Web configurator
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can
save the current base settings in a file on the PC (suffix .cfg).
If you change the settings accidentally or you need to reset the base due to a fault
(base reset), you can reload the saved settings from the file on your PC to your
phone.
The contents of the .cfg file include:
u
The settings for the local network (IP configuration)
u
The data for the (VoIP) connections established
u
The assignment of send and receive connections
u
Access code
u
The network mailbox number
u
The Internet services settings
u
The ECO DECT settings
You can save and restore the system settings via the Web page:
Settings
Resetting the base station and resetting all device settings
u
If your phone suddenly does not work as expected, you can restart it. This fre-
quently resolves problems.
u
You can also reset all of the settings on the phone to the default settings without
disconnecting it from the mains power supply, e.g., if you give your phone to a
third party or if you have forgotten your system PIN. All individual settings on
the base station are reset to the default settings, including the system PIN, and
all handsets registered beyond the delivery scope are deregistered.
If you have reset the base due to an error or forgotten system PIN, you can,
where applicable, reload settings (
page
You can start the restart and reset via the Web page
Settings
Changing the base settings, registering handsets
You can use the Web configurator to:
u
Switch the base to registration mode to register handsets to the base. This set-
ting corresponds to pressing and holding the registration/paging button on the
front of the base.
u
Activate/deactivate Eco Mode or Eco Mode+. For Eco Mode see
u
Change the system PIN
u
Activate and deactivate the LED for the registration/paging button on the front
of the base. See
u
Activate/deactivate the display of VoIP status messages on your handset.
The base settings are on the Web page
Settings
140
¤
¤
Management
Save and Restore
140) saved on the PC to the base.
¤
¤
Management
Reboot & Reset
¢
(
page 9
for the meaning of the LED.
¤
¤
Management
Miscellaneous
¢
„Saving and restoring system
page 105)
for your phone.
settings",
page
91.
Advertisement
Chapters
Table of Contents
