G Etting Started - Muratec F-300 User Manual

Level one Level two
function menu function menu
2.User 1.Machine
Settings Settings
2.Fax
Settings
2-6 G
ETTING STARTED
Level three
Description
function menu
07.Primary You can set the primary standby mode.
Mode
08.Service For technical support. Do not turn this setting
on unless an authorized technician asks you
Mode
to do so.
09.Date & Sets the current date and time
Time
10.Paper
Selects the paper source for faxing or copying. Fax
Source
11.Page Displays the total number of pages you have
Counter printed and scanned.
12.Scanner You can specify the sleep period of the scan-
Sleep ner lamp to prolong the life of your machine's
scanner lamp.
01.Scan You can set the following settings for fax
Parameters sending.
• Primary fax resolution
• Primary scanning contrast
• Super fine resolution
02.Print
You can set the following settings for fax
Parameters reception.
• Reduction rate
• Reduction margin
• Half-page reception*
* When the optional duplex unit is installed
on the MFX-1330, the following menu is
displayed.
• Paper save function
03.# of Rings Sets the number of rings before your machine
answers.
04.Redial Sets the number of times and dial interval for
automatic fax redialing.
05.Dialing Sets the dialing pause length.
Pause
06.Memory Tx Turns memory transmission on/off.
07.Quick Tx Turns quick memory transmission on/off.
08.Select TTI Selects the TTI you want to use.
09.ECM Mode Turns ECM mode on/off.
10.Block Junk Rejects unauthorized incoming faxes.
Fax
Setting Page
Scan 10-3
Copy
Fax
Off 10-3
On
— 10-3
10-3
Copy
Fax/Copy
Not Used
— 8-8
Off 10-4
On
Start time: 22:00
Reset time: 06:00
10-5
Normal, Fine,
S-Fine, Gray
Lightest, Light,
Normal, Dark,
Darkest
400dpi, 600dpi
5-7
10-5
Auto, 100%
40 mm (0-85 mm)
Off, On
Off, H. Page Rx,
Duplex Rx
2 times (1-10 times) 5-6
10-6
2 times (2-15 times) 10-6
1 min. (1-5 min.)
2 sec. (2-10 sec.) 10-6
Off 4-3
On 10-6
Off 4-3
On 10-6
Default 4-17
TTI1
TTI2
TTI3
Off
Off 10-6
On
Off 5-9
Mode1
Mode2
Mode3