Copy Resolution - Muratec F-300 User Manual

Copy resolution

Both machines offer the highest copy quality available. However, this feature also
requires more memory than with normal copy resolution. If you try to copy several pages
at a time, memory overflow may occur.
1
Make sure the machine is in the Copy mode.
2
Place your document in ADF face up, or on the document glass face down.
3
Press [Doc. Resolution].
Resolution
 Photo&Text 
4
Press [ ], [ ] or [Doc. Resolution] to select "600dpi".
Resolution
 Photo&Text 
5
Set the following as needed. (See "Basic copy settings" on page 7-4.)
• Document type and scanning contrast
• Number of copies
To reset the copy parameter to default setting, press [Reset].
6
Press [Start] to begin copying.
To stop copying, press [Stop].
NOTE: The document glass is available only for the MFX-1330.
:300dpi
:600dpi
C 7-11
OPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A