Copy Settings; Accessing The Copy Setting - Muratec F-300 User Manual

Copy settings

The copy settings allows you to customize various copy settings to match your needs.

Accessing the copy setting

1
Press [Menu], [2], [3].
[Program]
3 Copy Settings
2
Press [Enter].
[Program]
1 Scan Parameters
3
Use [ ] or [ ] to search the item you want to set or change and press [Enter].
4
Change settings and press [Enter]. For details of each setting, refer to the following
table:
5
When you have finished, press [Reset] to return to the standby mode.
The underlined settings are factory defaults.
1 Scan Parameters
2 Auto Reset Time
3 Copy Auto
4 Copy Protect
5 Sort Copy
6 Combine
No.23_
No.231
Doc. Type You can choose one of the following for the default.
Text, Photo&Text, Photo
Contrast You can choose one of the following for the default.
Normal, Dark, Darkest, Light , Lightest
The machine returns to its initial condition automatically in a certain
period of time. You can change this time from 1 to 10 minutes.
03 min.
The machine automatically selects the recording paper size according to
the document size and enlargement/reduction rate. You can change it to
select the document size or enlargement/reduction rate automatically,
instead of the recording paper size.
Paper Size The paper will be selected automatically according to the
document size and copy ratio.
Reduction Copy ratio will be set automatically according to the paper
size and document size.
Doc. Size Document size will be set automatically according to the
paper size and copy ratio.
Protects when switching to the copy mode. See page 9-13.
Default sort copy setting.
ON
The copies can be assembled as sets in sequential order.
OFF The copies will be printed on a page-by-page basis.
Default combine copy setting.
ON The machine always performs combine copies.
OFF
The machine only makes combine copies when set manually.
U 10-7
SER SETTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A