Basic Copy Settings; Selecting The Document Type; Scanning The Contrast; Zoom Ratio - Muratec F-300 User Manual

Basic copy settings

Selecting the document type

• Text — Select this when copying letters.
• Photo/Text — Select this when copying documents containing photographs or draw-
ings with letters.
• Photo — Select this when copying photographs or drawings.
To select the document type:
1
Press [Doc. Resolution].
2
Press [ ] or [ ] to select the document type.

Scanning the contrast

Setting the scanning contrast allows you to adjust the excessive light or darkness of the
document pages you are copying.
To change the contrast setting:
1
Press [Contrast].
2
Press [ ] to lighten, press [ ] to darken, or press [Contrast] repeatedly to select the
contrast.
To avoid confusing the Light and Dark settings, just remember — "Light lightens" and
"Dark darkens" — to keep it straight.

Zoom ratio

There are three ways to enter the zoom ratio.
NOTE: For enlarge copy, you can only use the document glass. The document glass is avail-
able only for the MFX-1330.
Using preset ratios
Press [ ] or [ ] to select the following preset ratio.
• 50%: Min.
• 64%: Letter (8.5"
• 78%: Legal (8.5"
• 100%
• 129%: Half-letter (5.5"
• 200%: Max.
7-4 C
OPYING
11")  Half-letter (5.5" × 8.5")
×
14")  Letter (8.5" × 11")
×
8.5")  Letter (8.5" × 11")
×