Passcode Protection; Security Features - Muratec F-300 User Manual

Security features

Your machine has a number of security features to keep your private fax documents
private, avoid unwanted outside communication and even protect against unauthorized
use of your machine.
These security features include:
(1) Security reception, (2) PIN mask, (3) Block junk fax, and (4) Department codes.

Passcode protection

Your machine has a passcode protection system which must be turned on in order to use
the security features listed below:
• Security reception
• PIN mask
• Department code protection
To set the passcode:
1
Press [Menu], [2], [1], [0], [2], then [Enter].
Protect Passcode
Old Passcode
2
If you are creating a passcode, use the numeric keys to enter 0000.
If you want to change or turn off the passcode, enter the current passcode.
3
Press [Enter].
Protect Passcode
New Passcode
4
Enter the new four-digit passcode between 0001 to 9999 and press [Enter].
– or –
To turn off passcode protection, enter 0000 and press [Enter].
5
Write down the passcode, and put it in a safe place.
6
Press [Reset] exit and to return to the standby mode.
9-2 S
ECURITY FEATURES
:****
:0000