Power Requirements - Muratec F-300 User Manual

Power requirements

Use a standard AC 120 V outlet
AC 120V
Do not share an extension cord connector with other plugs
Do not share an outlet with a large appliance
Plug in the power cord
Make sure the outlet is not controlled by a wall switch
If it is, you will risk occasional shutoffs to the machine, causing interuption or loss of fax service.
Use an electrical surge suppressor,
cal lines. This device helps to shield your machine from damaging high-voltage electrical surges.
vi
Use a standard three-pronged 120 V electrical outlet to power your
machine. Using any other electrical outlet will damage to your machine.
This could cause electrical shock.
High-consumption appliances such as a refrigerator or air conditioner can
cause "draw-downs" which could damage your machine.
Plug the power cord carefully and completely into a wall outlet. Do not
leave any portion of the electrical cord's metal plugs exposed. Doing so
could cause a fire and increases the risk of electrical shock.
preferably one which guards both telephone and electri-