Machine Errors; Faxing Errors - Muratec F-300 User Manual

Machine errors

Symptom
The LCD shows nothing, and
the keys are not working.
The machine is not activated
when the power switch is
turned on.
The machine beeps and shows
an error message.
Documents jam frequently
Paper Jams Frequently

Faxing errors

Symptom
Cannot send
Cannot stop transmission
Cannot receive automatically
Cannot receive manually
Cannot store a document into
memory
* The document glass is available only for the MFX-1330.
12-20 M
AINTENANCE
Check that the power switch is turned on.
Check that the power cord is connected properly.
See "LCD error messages," on page 12-14.
• Check for the ADF cover is closed properly.
• If there is a foreign matter in the ADF, remove it.
• Ensure that the document is an acceptable weight. (See "Document handling,"
page 2-10.)
• Clean the ADF rollers (see page 12-3.)
• Ensure that the paper is an acceptable weight. (See "Paper handling," page 2-12.)
• Check that the phone line is connected properly.
• Check that the number stored in your autodialer is correct.
• Make sure that the machine is in fax mode. If not, change to the mode to the fax
mode by pressing [COPY
Your machine cannot cancel a transmission by pressing [Stop]. To cancel a trans-
mission, press [Job Confirm./Fax Cancel] and select a job you want to cancel,
then press [Enter]. (See "Reviewing or canceling commands," page 4-8 for more
details.)
• Check that the phone line is connected properly.
• Check that the machine is in the automatic receiving mode (page 5-2).
• The memory may be full. If there is no paper in the cassette, set a paper to print
the received document stored in the memory.
• Make sure that the external phone is attached to your machine to receive a fax
manually.
• In manual receive mode, you must press [Start] before you hang up the phone.
• The memory may be full. If there is no paper in the cassette, set paper.
• Make sure that the machine is in fax mode. If not, change to the mode to the fax
mode by pressing [COPY
• The memory may be full. If there is no paper in the cassette, set the paper to print
the received document stored in the memory.
• The number of document can be stored in the current operation is full. Delete
unnecessary documents.
& P
ROBLEM SOLVING
Suggested solutions
Suggested solutions
FAX SCAN].
 
FAX SCAN].
 