Muratec F-300 User Manual page 34

If you make a mistake, press [Cancel] to erase to the left.
To change just one character, press [ ] or [ ] to move the cursor, press [Cancel] to
erase it. Then re-enter the correct character.
21
Press [Enter].
TTI 2
_
If you do not want to enter TTI 2, skip to step 23.
22
Use the numeric keys to enter the name for TTI 2.
23
Press [Enter].
TTI 3
_
If you do not want to enter TTI 3, skip to step 25.
24
Use the numeric keys to enter the name for TTI 3.
25
Press [Enter] to save the setting and continue.
Default TTI selection
26
The machine now asks you to set the default TTI to be shown at the top of faxes you
send.
Usual TTI
27
Press [ ] or [ ] to select TTI 1, TTI 2 or TTI 3.
28
Press [Enter] to save the setting and continue.
Idle time setting for switching to the Energy Save mode
29
The machine will now ask you to enter the time at which the machine will enter the
energy save mode.
Your machine will automatically enter the Energy save mode after your entered time
has elapsed.
The default value is 5 minutes.
Energy Save Timing
(001-240)
30
Enter the time (in minutes) using the numeric keys.
31
Press [Enter] to save the setting.
32
Press [Reset] to return to the standby mode.
1-16 L & I
AYOUT
;Upper
;Upper
:TTI 1
 /  /Enter
005 min.
NSTALLATION