Programming A Soft Key - Muratec F-300 User Manual

Function name
Dial Prefix
Bypass
Duplex Copy
Page Counter
Energy Save
Online
Mode Switch
Note 1: The optional NIC (network interface card) is required.
Note 2: The optional 2nd phone kit is required.
Note 3: The optional duplex unit is required. (MFX-1330 only)
Note 4: For details of PC printing, refer to the PDF manual on the Printer & Scanner driver CD.
The following functions are the default settings:
Soft key 1
Soft key 2
Soft key 3
NOTE: When "Report", "Fax & Copy", "Memory Tx", "Cover Page" or "Select TTI" are
selected, the function is only valid for the following trnasmission. Once that trans-
mission is complete, the setting returns to its default setting. If you want to change
the default setting, see "User settings" on pages 10-1 to 10-8.

Programming a soft key

1
Press [Menu], [2], [1], [0], [3], then [Enter].
Select Soft Key No.
1:Sort Copy
The machine shows the function currently assigned to the soft key.
2
Press [ ] or [ ] to select the soft key (1 to 3) you want to change.
3
Press [Enter].
1:Sort Copy
4
Press [ ] or [ ] to select the function you want to assign.
5
Press [Enter].
6
If you want to program another soft key, repeat this procedure from step 2.
To exit the operation, press [Reset].
7
Use the soft key labels supplied with your machine to label the soft key for easy refer-
ence.
NOTE: Default settings cannot be set into another soft key.
Descriptions
Use this to enter a "/N" symbol.
Use this to set the paper size on the bypass tray.
Use this to set the duplex copy.
Note 3
Displays total printed and scanned page.
Switches to the energy save mode immediately.
Cancels PC printing.
Switches the machine's mode.
MFX-1330
Sort Copy Report
Bypass Monitor
Combine Pause /Dial Opt.

/  /Enter
Light indi-
cation
—
—
on
—
on
on
—
F-300
S
PECIAL FEATURES
Reference
page
4-21
2-16
7-9
8-8
1
1-17
Note 4
2
2-2
3
4
5
6
7
8
9
10
11
12
13
14
A
8-3