Muratec F-300 User Manual page 150

12.Scanner Sleep
10-4 U
SER SETTINGS
You can specify the sleep period of the scanner lamp to prolong the life
of your machine's scanner lamp. You can use the machine during the
scanner sleep mode, but it will take a few moments to light the scanner
lamp completely.
ON
After you turn the scanner sleep mode ON, you can set the
scanner lamp sleep start time and sleep reset time.
Start time
Enter the sleep start time using 24-hour format.
(e.g. 10:00 p.m. as 22:00)
The machine automatically turns off the scanner lamp at
the time specified here. The default setting is 22:00.
Reset time
Enter the sleep end time using 24-hour format.
The machine automatically turns on the scanner lamp at
the time specified here. The default setting is 06:00.
OFF Disables the scanner sleep mode. The scanner lamp always
lights.