Selecting The Document Size - Muratec F-300 User Manual

Also, you can select the paper source manually by pressing [Paper Size /Next Doc.].
The LCD toggles the paper size in the 1st cassette, in the 2nd cassette (if installed) and
on the bypass tray.
Copy Ready
Auto
If the bypass tray is empty, the machine shows "None" for the paper size of the bypass
tray.

Selecting the document size

When using the document glass, select the document size by pressing [Doc. Size] repeat-
edly until your desired document size appears. You can choose the Letter, Half-letter
or Legal:
Copy Ready
Auto
Auto
NOTE: • The document glass is available only for the MFX-1330.
• When the document size selection is set to "Auto" (see "Copy Auto" of "Copy set-
tings" on page 10-7), you cannot select the document size by pressing [Doc. Size].
In this mode, the machine will set the document size automatically according to
the paper size and zoom settings.
Copy Ready
[(Document size)] means the machine automatically sets the document size.
7-6 C
OPYING
Ltr 100%
Ltr [Ltr
Legl [Legl ] 100%
None
01
Ltr 100%
Legl 100%
Auto HLtr
Ltr [Ltr ] 100%
01
01
] 100%
01
01
Ltr 100%
01
01
100%
01