Muratec F-300 User Manual page 96

To change a specific digit, press [ ] to move left or [ ] to move right until the cursor
is under the digit, then use the numeric key to enter the correct number.
7
Press [Enter] to save the setting.
8
If you do want to enter other number, repeat procedures from step 5.
To exit, press [Reset].
Erasing a number from the blocked numbers list
To clear a number from the list:
1
Press [Menu], [2], [2], [1], [0], then [Enter].
Block Junk Fax:Mode2
2
Press [Enter].
Select BlockJunk No.
01:5553038_
3
Press [ ] or [ ] until you see the number you want to clear.
4
Press [Cancel].
01:Erase Junk Fax
Yes  Enter
5
Press [Enter] to erase the number. If you want to cancel the erasing, press [Cancel].
6
To clear another number, repeat procedures from step 3.
7
Press [Reset] to return your machine to standby mode.
Printing a list of the blocked numbers:
To print a list of the blocked numbers, press [Menu], [5], [1], [1], [0], then [Enter].
5-10 R
ECEIVING FAXES


/ /Enter
01:Erase Junk Dial
No  Cancel