G Etting Started - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Level one Level two
function menu function menu
2.User 1.Machine
Settings Settings
2.Fax
Settings
2.6 G
ETTING STARTED
Level three
Description
function menu
07.Primary You can set the primary standby mode.
Mode
08.Service For technical support. Do not turn this setting
to on unless an authorized technician asks
Mode
you to do so.
09.Date & Enter the current date and time
Time
10.Paper
Select the paper source for faxing or copying.
Source
11.Page Displays the total number of pages you have
Counter printed and scanned.
01.Scan You can set the following settings for fax
Parameters sending.
• Primary fax resolution
• Primary scanning contrast
• Super fine resolution
02.Print You can set the following settings for fax
Parameters reception.
• Reduction rate
• Reduction margin
• Half-page reception*
* When the optional duplex unit is installed
in MFX-1330 model, the following menu is
displayed.
• Paper save function
03.# of Rings Set the number of rings before your machine
answers.
04.Redial Set the number of times and interval for
automatic fax redialing.
05.Dialing Set dialing pause length.
Pause
06.Memory Tx On/Off setting of Memory transmission.
07.Quick Tx On/Off setting of Quick Memory transmis-
sion.
08.Select TTI Select TTI you want to send.
09.ECM Mode On/Off setting of ECM mode.
10.Block Junk
Reject the fax reception from unauthorized
Fax incoming faxes.
11.Security Keep all received fax messages in memory
Rx and after print them manually.
12.Separator Partition each received documents by insert-
Page ing the separator page.
Setting Page
Scan 10.3
Copy
Fax
Off 10.3
On
— 10.3
Fax 10.3
Copy
Fax/Copy
Not Used
— 8.8
10.4
Normal, Fine,
S-Fine, Gray
Lightest, Light,
Normal, Dark,
Darkest
400dpi, 600dpi
5.7
10.4
Auto, 100%
40 mm (0-85 mm)
Off, On
Off, H. Page Rx,
Duplex Rx
2 times (1-10 times) 5.6
10.5
2 times (2-15 times) 10.5
1 min. (1-5 min.)
2 sec. (2-10 sec.) 10.5
Off 4.3
On 10.5
Off 4.3
On 10.5
Default 4.17
TTI1
TTI2
TTI3
Off
Off 10.5
On
Off 5.9
Mode1
Mode2
Mode3
Off 11.3
On
Off 5.14
On