Autodialer Basics; Autodialers; Call Groups; Destination Names And Phone Directory Dialing - Muratec F-300 User Manual

Autodialer basics

Your machine's autodialer stores your most frequently called phone and fax numbers for
instant recall.

Autodialers

There are two kinds of autodialer numbers. The difference between the two is how you
dial them.
Type
One-touch key
Speed-dial number

Call groups

Call groups are sets of fax numbers that make it easy to send the same fax message to
several locations.
Your machine can store up to 200 numbers in each group, with up to 32 groups total.
Also see "Call group dialing" on page 3-9.

Destination names and phone directory dialing

When you store numbers in your autodialer, you can give these numbers descriptive
names, such as "Chicago office" or "Billing department".
The phone directory sorts these names alphabetically. Using phone directory dialing, you
can look up these numbers by their descriptive names, just as if you were using a phone
book.
Also see "Phone directory dialing" on page 3-11.
3-2 A
UTODIALLER
How to dial
Press one of the keys marked 1 to 40 on
the left side of the control panel.
Press [Speed Dial /Group] followed by a
three-digit identifier between 001 and
160.
& D
IALLING OPTIONS
Numbers stored
40
160