Transporting The Machine; Storing And Handling The Toner And Drum Cartridges - Muratec F-300 User Manual

Do not rest furniture or other equipment on the power cord
Allow clearance around the outlet

Transporting the Machine

If you need to transport the machine over a long distance, consult your Muratec dealer.

Storing and handling the toner and drum cartridges

To avoid damage to your machine and to assure the best performance possible, follow these guidelines
when storing and handling the toner and drum cartridges:
Use supplies manufactured specifically for Muratec machines
Using toner and drum cartridges or other supplies that are not manufactured specifically for your
machine may affect the operation of your unit.
Storing the cartridges
Store the cartridges in a location that meets the following requirements:
• Free from direct sunlight
• Away from dusty conditions
• Away from floppy disks or other computer media, computer screens, or other materials sensitive
to magnetic fields.
• Away from high humidityy
• Do not stand the cartridge on its end and do not store it upside down.
• Do not open the protective bag containing the cartridge until you are ready to install the car-
tridge.
Cartridge handling
• Do not burn toner cartridges
Toner powder is extremely flammable. Exposure to flame can cause the toner cartridge to burn or
explode, causing serious injury.
• Keep cartridges away from water and oil.
• Do not expose cartridges to direct sunlight.
• Do not subject cartridges to static or electrical shock.
CAUTION: Be careful not to get the toner powder in your eyes. If toner powder gets in your
eyes, immediately flush your eyes with water and seek medical assistance.
viii
Do not put anything on or over the electrical power cord, and do not route
the power cord under rugs or carpets. Doing so can damage the power cord
and/or machine, causing fire or electrical shock.
Do not stack boxes or furniture around the outlet.