Erasing A Macro Key; Macro Key Speed - Muratec F-300 User Manual

8
Enter the macro name by using the numeric keys. (If necessary, review "Entering
character," page 2-2) It can be store up to 130 characters.
9
Press [Enter] to finish.
NOTE: To print a list of macro keys, press [Menu], [5], [1], [1], [8], then [Enter].

Erasing a Macro key

1
Press [Macro Program] twice.
2.Erase Macro
2
Press [Enter].
3
Press the macro key you want to erase.
4
Press [Enter]. The following two displays will appear:
M1:Erase Macro
Yes  Enter
5
Press [Enter] to erase the macro.
If you want to quit without erasing, press [Cancel].
6
To erase another macro, repeat procedures from step 3.
Press [Reset] to return to standby mode.

Macro key speed

You can adjust the Macro key speed.
1
Press [Macro Program] three times.
3.Macro Speed
2
Press [Enter].
3
Press [ ] or [ ] to select the mode you want appears. The possible settings are
"Normal", "Slow" or "Fast".
4
Press [Enter] to save the setting.
5
Press [Reset] to exit.
8-6 S
PECIAL FEATURES

/  /Enter
M1:Erase Macro
No

/  /Enter
 Cancel