Specifying User Settings; System Settings - Konica Minolta bizhub 601 User Manual

Utility mode
11.3

Specifying user settings

This section describes the function and main registration parameters that can be specified after pressing the
[Utility/Counter] key, then touching [User Settings].
11.3.1

System Settings

Language Selection
Description
Select the language of the touch panel message.
Measurement Unit Settings
Description
Select one of the following as the measurement units in which values are displayed in
the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
Paper Tray Settings
Parameter
Auto Tray Selection
Settings
Auto Tray Switch
ON/OFF
No Matching Paper in
Tray Setting
Print Lists
Paper Type/Size Set-
tings
Post Inserter Alert Dis-
play Setting
* Appears when the optional Large Capacity Unit LU-405/406 is installed.
Power Save Settings
Parameter
Low Power Mode Settings
Sleep Mode Settings
751/601
Description
Select the paper trays that are selected automatically when
the "Auto" Paper setting is specified. In addition, specify the
priority of the paper trays when the auto tray switch operation
is performed.
Select whether or not a paper tray loaded with paper of the
same size is selected automatically when a paper tray that
was selected manually becomes empty while printing copies.
Select the operation that is performed when there is no paper
of the corresponding size in the specified paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
When the corresponding size or type of paper is not load-
ed in the specified paper tray, a different paper tray is se-
lected if it contains paper of the corresponding size.
Select the paper tray used for printing lists, such as the sales
counter and consumables indicators.
Specify the paper type to be use for each tray.
Specify whether to display the paper size and paper orienta-
tion during the tray display or an alarm indication for the post
inserter.
Description
Specify the desired length of time (between 1 and 240 min-
utes) until the machine enters Power Save mode.
Specify the desired length of time (between 1 and 240 min-
utes) until the machine enters Sleep mode.
11
Default Setting
English
Default Setting
inch (Fraction)
Default Setting
Tray priority order: Tray 1
→ Tray 2 → Tray 3 → Tray
*
4 → Bypass → LCT
Restrict
Stop Printing (Tray Fixed)
Tray 1, 1-Sided
Plain Paper
Yes
Default Setting
15 minutes
60 minutes
11-15