Konica Minolta bizhub 601 User Manual page 264

Copy paper/originals
– If a setting for special paper is selected, the bypass is not selected automatically with the "Auto"
Paper setting.
– The auto tray switch feature applies only to paper trays specified with the same paper type setting.
3
Touch [Change Tray Settings].
4
Select the appropriate setting for the type of special paper that is loaded.
– Touch the button for the desired paper type.
5
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
Reminder
If special paper is loaded into the bypass tray, be sure to select the corresponding paper type,
otherwise a paper misfeed may occur.
751/601
6
6-19