Specifying User Settings; System Settings - Konica Minolta bizhub c650 User Manual

Utility mode
11.3

Specifying user settings

This section describes the function and main registration parameters that can be specified after pressing the
[Utility/Counter] key, then touching [User Settings].

System Settings

Language Selection
Description
Select the language of the touch panel messages.
Measurement Unit Settings
Description
Select one of the following as the measurement units in which values are displayed in
the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
Paper Tray Settings
Parameter
Auto Tray Selection
Settings
Auto Tray Switch
ON/OFF
No Matching Paper in
Tray Setting
Print Lists
Cover Sheet Feeder
Setting
Note
"LCT" appears for "Auto Tray Selection Settings" only when the optional LCT is installed.
Auto Color Level Adjustment
Description
Adjust the reference level for detecting a color or black-and-white document when the
"Auto Color" setting is selected. The reference level can be set to one of 5 settings.
Power Save Settings
Parameter
Low Power Mode Settings
Sleep Mode Settings
C650
Description
Select the paper trays that are selected automatically when
the "Auto" Paper setting is specified. In addition, specify the
priority of the paper trays when the auto tray switch operation
is performed.
Select whether or not a paper tray loaded with paper of the
same size is selected automatically when a paper tray that
was selected manually becomes empty while printing copies.
Select the operation that is performed when there is no paper
of the corresponding size in the specified paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
Whether or not the specified paper tray contains paper of
the corresponding size is determined and, if it does not, a
different paper tray is selected if it contains paper of the
corresponding size.
Select the paper tray used for printing lists, such as the sales
counter and consumables indicators.
Select the paper tray of the post inserter, paper type and pa-
per size. This parameter is available if the optional post insert-
er has been installed.
Description
Specify the desired length of time (between 10 and 240
minutes) until the machine enters Power Save mode.
Specify the desired length of time (between 15 and 240
minutes) until the machine enters Sleep mode.
11
Default Setting
English
Default Setting
mm (Numerical Value)
Default Setting
Tray priority order:
Tray 1 → Tray 2 → Tray 3
→ Tray 4 → LCT*
*Appears only when the
LCT is installed.
Restrict
Stop Printing (Tray Fixed)
Tray1, 1-Sided
F1, Plain Paper, Auto De-
tect
Default Setting
Standard (3)
Default Setting
15 minutes
30 minutes
11-15