Konica Minolta bizhub 601 User Manual page 362

Replacing toner cartridges and staple cartridges and emptying hole-punch scrap box
3
Remove the staple cartridge holder.
– Hold the lever on the staple cartridge holder, and then
pull the holder down to remove it.
4
Remove the empty staple cartridge from the staple
cartridge holder.
5
Load the new staple cartridge into the staple cartridge
holder.
– Do not remove the remaining staples, otherwise the
machine will not be able to staple after the cartridge
is replaced.
751/601
8
8-8