Konica Minolta bizhub 601 User Manual page 132

Basic copy operations
Setting
Offset
Face Up
Fold/Bind
Output Tray
Staple
Punch
The following procedures describe how to select Finishing settings.
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit or Z folding unit is installed with the optional
finisher.
751/601
Description
If no finisher is installed
If the sorting conditions are met,
printed copies are fed out and
sorted in an alternating criss-
cross pattern.
1 4
1 3
1
4 1
3 1
2 1
1 1
The copies are output with their
front sides facing up.
Select this setting to fold copies.
The copies can also be bound
with staples at the same time.
The "Fold/Bind" setting can be
used if the optional Finisher FS-
610 is installed.
The copies are output to the specified paper tray.
Select one of these settings to
bind the copies with a staple in
the corner or with two staples.
Holes are punched (2 or 3 holes)
in the copies for filing them.
1 4
1
1 3
4 1
3
2
1
If a finisher is installed
The copies are fed out and
stacked on top of each other
with each set shifted to separate
2
it.
1
2
2
1
1
1
2-55